MD-100 Premium PDF & Test Engine Files with 379 Questions & Answers
Get 100% Real MD-100 Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
NEW QUESTION # 39
You have a computer that runs Windows 10 and contains the folders shown in the following table.
You create the groups shown in the following table.
On FolderA, you remove permission inheritance. To each folder, you assign the NTFS permissions shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
YES
YES
NO
NEW QUESTION # 40
You have a workgroup computer named Computer1 that runs Windows 10. Computer1 has the users accounts shown in the following table:
Computer1 has the local Group Policy shown in the following table.
You create the Local Computer\Administrators policy shown in the following table.
You create the Local Computer\Non-Administrators policy shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-vista/cc766291(v=ws.10)
NEW QUESTION # 41
Your company has a wireless access point that uses WPA2-Enterprise.
You need to configure a computer to connect to the wireless access point.
What should you do first?
- A. Request and install a certificate.
- B. Create a provisioning package in Windows Configuration Designer.
- C. Request a passphrase.
- D. Create a Connection Manager Administration Kit (CMAK) package.
Answer: C
Explanation:
Explanation/Reference:
References:
https://support.microsoft.com/en-za/help/17137/windows-setting-up-wireless-network Maintain Windows Testlet 1 Case Study This is a case study. Case studies are not timed separately. You can use as much exam times as you would like to complete each case. However, there may be additional studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. When you are ready to answer a question, click the Question button to return to the question.
Overview
Existing Environment
Fabrikam, Inc. is a distribution company that has 500 employees and 100 contractors.
Active Directory
The network contains an Active Directory forest named fabrikam.com. The forest is synced to Microsoft Azure Active Directory (Azure AD). All the employees are assigned Microsoft 365 E3 licenses.
The domain contains a user account for an employee named User10.
Client Computers
All the employees have computers that run Windows 10 Enterprise. All the computers are installed without Volume License Keys. Windows 10 license keys are never issued.
All the employees register their computer to Azure AD when they first receive the computer.
User10 has a computer named Computer10.
All the contractors have their own computer that runs Windows 10. None of the computers are joined to Azure AD.
Operational Procedures
Fabrikam has the following operational procedures:
* Updates are deployed by using Windows Update for Business.
* When new contractors are hired, administrators must help the contactors configure the following settings on their computer:
- User certificates
- Browser security and proxy settings
- Wireless network connection settings
Security Policies
The following security policies are enforced on all the client computers in the domain:
* All the computers are encrypted by using BitLocker Drive Encryption (BitLocker). BitLocker recovery information is stored in Active Directory and Azure AD.
* The local Administrators group on each computer contains an enabled account named LocalAdmin.
* The LocalAdmin account is managed by using Local Administrator Password Solution (LAPS).
Problem Statements
Fabrikam identifies the following issues:
* Employees in the finance department use an application named Application1. Application1 frequently crashes due to a memory error. When Application1 crashes, an event is written to the application log and an administrator runs a script to delete the temporary files and restart the application.
* When employees attempt to connect to the network from their home computer, they often cannot establish a VPN connection because of misconfigured VPN settings.
* An employee has a computer named Computer11. Computer11 has a hardware failure that prevents the computer from connecting to the network.
* User10 reports that Computer10 is not activated.
Technical Requirements
Fabrikam identifies the following technical requirements for managing the client computers:
Provide employees with a configuration file to configure their VPN connection.
* Use the minimum amount of administrative effort to implement the technical requirements.
* Identify which employees' computers are noncompliant with the Windows Update baseline of the company.
* Ensure that the service desk uses Quick Assist to take remote control of an employee's desktop during support calls.
* Automate the configuration of the contractors' computers. The solution must provide a configuration file that the contractors can open from a Microsoft SharePoint site to apply the required configurations.
NEW QUESTION # 42
You have a workgroup computer that runs Windows 10.
You need to set the minimum password length to 12 characters.
What should you use?
- A. User Accounts in Control Panel
- B. System Protection in System Properties
- C. Sign-in options in the Settings app
- D. Local Group Policy Editor
Answer: D
NEW QUESTION # 43
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that runs Windows10.
A service named Application1 is configured as shown in the exhibit.
You discover that a user used the Service1 account to sign in to Computer1 and deleted some files.
You need to ensure that the identity used by Application1 cannot be used by a user to sign in to sign in to the desktop on Computer1. The solution must use the principle of least privilege.
Solution: On Computer1, you configure Application1 to sign in as the LocalSystem account and select the Allow service to interact with desktop check box. You delete the Service1 account.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
https://docs.microsoft.com/en-us/windows/win32/services/localsystem-account
NEW QUESTION # 44
You have a computer that runs Windows 10 Home.
You need to upgrade the computer to Windows 10 Enterprise as quickly as possible. The solution must retain the user settings.
What should you do first?
- A. Install the latest feature updates.
- B. Run the sysprep command.
- C. Run the scanscace command.
- D. Perform an in-place upgrade to Windows Pro.
Answer: D
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/windows/deployment/upgrade/windows-10-upgrade-paths
NEW QUESTION # 45
You are a network administrator at your company.
The company uses an application that checks for network connectivity to a server by sending a ping request to the IPv6 address of the server replies, the application loads.
A user cannot open the application.
You manually send the ping request from the computer of the user and the server does not reply. You send the ping request from your computer and the server replies.
You need to ensure that the ping request works from the user's computer.
Which Windows Defender firewall rule is a possible cause of the issue?
- A. File and Printer Sharing (Echo Request ICMPv6-In)
- B. File and Printer Sharing (Echo request ICMPv6-Out)
- C. File and Printer Sharing (NB-Datagram-In)
- D. File and Printer Sharing (NB-Datagram-Out)
Answer: A
Explanation:
Explanation/Reference:
References:
https://www.howtogeek.com/howto/windows-vista/allow-pings-icmp-echo-request-through-your-windows- vista-firewall/
NEW QUESTION # 46
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that runs Windows 10.
You test Windows updates on Computer1 before you make the updates available to other users at your company.
You install a quality update that conflicts with a customer device driver.
You need to remove the update from Computer1.
Solution: From an elevated command prompt, you run the wusa.exe command and specify the /uninstall parameter.
Does this meet the goal?
- A. Yes
- B. No
Answer: A
Explanation:
Explanation
References:
https://support.microsoft.com/en-us/help/934307/description-of-the-windows-update-standalone-installer-in-win
NEW QUESTION # 47
You have a computer named Computer1 that runs Windows 10.
On Computer1 you create a VPN connection as shown in the following exhibit.
Answer:
Explanation:
NEW QUESTION # 48
You have a computer that runs Windows 10. The computer contains two local user accounts named User1 and User2. User2 is a member of the local Administrators group.
User1 performs the actions shown in the following table.
User2 performs the actions shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 49
You have a computer that runs Windows 10. The computer contains a folder named C:\ISOs that is shared in ISOs.
You run several commands on the computer as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 50
You are a network administrator at your company.
The company uses an application that checks for network connectivity to a server by sending a ping request to the IPv6 address of the server replies, the application loads.
A user cannot open the application.
You manually send the ping request from the computer of the user and the server does not reply. You send the ping request from your computer and the server replies.
You need to ensure that the ping request works from the user's computer.
Which Windows Defender firewall rule is a possible cause of the issue?
- A. File and Printer Sharing (Echo Request ICMPv6-In)
- B. File and Printer Sharing (Echo request ICMPv6-Out)
- C. File and Printer Sharing (NB-Datagram-In)
- D. File and Printer Sharing (NB-Datagram-Out)
Answer: A
Explanation:
Explanation
References:
https://www.howtogeek.com/howto/windows-vista/allow-pings-icmp-echo-request-through-your-windows-vistaf
NEW QUESTION # 51
You have a computer named Computer5 that runs Windows 10 that is used to share documents in a workgroup.
You create three users named User-a, User-b, User-c. The users plan to access Computer5 from the network only.
You have a folder named Dat
a. The Advanced Security Settings for the Data folder are shown in the Security exhibit. (Click the Security Exhibit tab).
You share the Data folder. The permission for User-a are shown in the User-a exhibit (Click the User-a tab.)
The permissions for user-b are shown in the User-b exhibit. (Click the User-b tab.)
The permissions for user-c are shown in the User-c exhibit. (Click the User-c tab.)
For each of the following statements, select Yes if the statements is true. Otherwise, select No.
NOTE: Reach correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 52
You have a computer named Computer1 that runs Windows 10.
On Computer1, you create a VPN connection as shown in the following exhibit.
The corporate network contains a single IP subnet.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 53
Your network contains an Active Directory domain. The domain contains 100 computers that run Windows 10.
You need to configure the computers to send the error events in the System log to a computer named Computer1 that runs Windows 10.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 54
You have a computer that runs Windows 10 and contains the folders shown in the following table.
You create the groups shown in the following table.
On FolderA, you remove permission inheritance. To each folder, you assign the NTFS permissions shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/access-control
NEW QUESTION # 55
You need to sign in as LocalAdmin on Computer11.
What should you do first?
- A. From Microsoft Intune, edit the policy password settings on Computer11.
- B. From the LAPS UI tool, reset the administrator account password for the computer object of Computer11.
- C. From Local Security Policy, edit the policy password settings on Computer11.
- D. From the LAPS UI tool, view the administrator account password for the computer object of Computer11.
Answer: D
Explanation:
References:
https://technet.microsoft.com/en-us/mt227395.aspx
Topic 1, Fabrikam, Inc.
Existing Environment
Fabrikam, Inc. is a distribution company that has 500 employees and 100 contractors.
Active Directory
The network contains an Active Directory forest named fabrikam.com. The forest is synced to Microsoft Azure Active Directory (Azure AD). All the employees are assigned Microsoft 365 E3 licenses.
The domain contains a user account for an employee named User10.
Client Computers
All the employees have computers that run Windows 10 Enterprise. All the computers are installed without Volume License Keys. Windows 10 license keys are never issued.
All the employees register their computer to Azure AD when they first receive the computer.
User10 has a computer named Computer10.
All the contractors have their own computer that runs Windows 10. None of the computers are joined to Azure AD.
Operational Procedures
Fabrikam has the following operational procedures:
Updates are deployed by using Windows Update for Business.
When new contractors are hired, administrators must help the contactors configure the following settings on their computer:
- User certificates
- Browser security and proxy settings
- Wireless network connection settings
Security policies
The following security policies are enforced on all the client computers in the domain:
All the computers are encrypted by using BitLocker Drive Encryption (BitLocker). BitLocker recovery information is stored in Active Directory and Azure AD.
The local Administrators group on each computer contains an enabled account named LocalAdmin.
The LocalAdmin account is managed by using Local Administrator Password Solution (LAPS).
Problem Statements
Fabrikam identifies the following issues:
Employees in the finance department use an application named Application1. Application1 frequently crashes due to a memory error. When Application1 crashes, an event is written to the application log and an administrator runs a script to delete the temporary files and restart the application.
When employees attempt to connect to the network from their home computer, they often cannot establish a VPN connection because of misconfigured VPN settings.
An employee has a computer named Computer11. Computer11 has a hardware failure that prevents the computer from connecting to the network.
User10 reports that Computer10 is not activated.
Technical Requirements
Fabrikam identifies the following technical requirements for managing the client computers:
Provide employees with a configuration file to configure their VPN connection.
Use the minimum amount of administrative effort to implement the technical requirements.
Identify which employees' computers are noncompliant with the Windows Update baseline of the company.
Ensure that the service desk uses Quick Assist to take remote control of an employee's desktop during support calls.
Automate the configuration of the contractors' computers. The solution must provide a configuration file that the contractors can open from a Microsoft SharePoint site to apply the required configurations.
NEW QUESTION # 56
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597
You need to enable the Prohibit User from manually redirecting Profile Folders Group Policy setting only for the administrative users of Client3.
To complete this task, sign in to the required computer or computers.
- A. 1. Open the Administrator Group Local Group Policy Editor.
Answer: A
Explanation:
2. In the left pane, click on User Configuration, Administrative Templates, and Desktop.
3. In the right pane, right click on Prohibit User from Manually redirecting Profile Folders and click on Properties.
4. To Prevent User Profile Folders Location Change
Select (dot) Enabled and click on OK.
5. Close the Local Group Policy Editor window.
Reference:
https://www.vistax64.com/threads/user-profile-folders-prevent-or-allow-location-change.180719/
NEW QUESTION # 57
You have computers that run Windows 10 and are configured as shown in the following table.
You have a removable USB drive named USBDrive1 that is encrypted by using BitLocker to Go.
You plan to use USBDrive1 on Computer1, Computer2, and Computer3.
You need to identify on which computers you can enable automatic unlocking of BitLocker on USBDrive1.
Which computers should you identify?
- A. Computer3 only
- B. Computer1, Computer2, and Computer3
- C. Computer2 and Computer3 only
- D. Computer1 and Computer3 only
Answer: D
Explanation:
The BitLocker key is stored in the registry when you enable auto-unlock but only if the operating system drive is encrypted with BitLocker. A TPM is not required.
NEW QUESTION # 58
......
Microsoft MD-100: Windows Client exam is a certification test designed to validate the skills and knowledge of IT professionals who work with Windows 10. MD-100 exam is ideal for those who want to demonstrate their proficiency in deploying, configuring, and maintaining Windows 10 devices and services. Passing MD-100 exam is a significant milestone that will help IT professionals advance their careers in the field of Windows client management.
MD-100 Premium Files Practice Valid Exam Dumps Question: https://ucertify.examprepaway.com/Microsoft/braindumps.MD-100.ete.file.html